Custom Wheelset Builder - Rear Rims - 700c/29 Inch

• Same rim as used on DT R 23 Spline wheels
• Tubeless-Ready Alloy rim can be used with or without tubes (tape, valves and sealant sold seperately)
• Recommended tire size: 700x19 - 700x35mm
• No eyelets
• Brake Compatibility: Rim Brake
• Brake Track: Machined
• Color: Black
• ISO Diameter: 622 / road / 29"
• Internal Rim Width (mm): 18 mm
• External Width: 23 mm
• Manufacturer Spec ERD (mm): 596 mm
• Material: Alloy
• Rim Depth (mm): 23 mm
• Rim Joint: Pinned/Sleeved
• Tire Type: Clincher , Tubeless Compatible
• Valve: Presta
• Valve Length: Short
• Weight (g): 460 g

• Sleeve jointed, 20mm ID, 24mm OD wide disc specific rim
• Single-pocket hollow rim construction/extrusion
• For use with standard tires or tubeless compatible with DT's tubeless tape and valve stem (sold separately)
• Size: 700c
• Width/Height: 24/23mm
• Holes: 24h
• ERD: 596mm
• Weight: 450g.
• Color: black

• Wheel Size: 700c
• Brake Track: None
• Hub Drilling: choose; 28h, 28h, or 32h
• Rim Width (Internal): 22mm
• Rim Width (External): 26mm
• ISO Diameter: 622 / road / 700c
• Rim Material: Alloy
• Manufacturer Spec ERD: 596mm
• Rim Center Offset: 0mm
• Rim Depth: 23mm
• Rim Joint: Sleeved
• Tire Type: Tubeless Ready
• Brake/Compatibility: disc brake only
• Valve: Presta
• Weight: 495g.
• Color: Black

• Tubeless-Ready Alloy rim can be used with or without tubes (tape, valves and sealant sold separately)
• In its asymmetric version it allows to build wheels with even tension, making for an even crispier ride
• Rim Joint: Welded
• Machined Brake Track
• Pro Head Reinforcement (PHR) system acts like a ball and socket interface allowing the spoke to pivot and follow the perfect trajectory from hub to rim
• 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included
• The wheel must be built with the supplied PHR washers and Pro Head nipples.
• DT Swiss recommends that the contact area between the nipple and PHR washer is greased
• ISO Diameter: 622 / road / 29"
• Manufacturer Spec ERD (mm): 601 mm (Including washers)
• Rim Center Offset (mm): 3 mm
• Rim Depth (mm): 21 mm
• Rim Width (External): 21.5 mm
• Rim Width (Internal): 18 mm
• Weight: 435g.

• Tubeless-Ready Alloy rim can be used with or without tubes (tape, valves and sealant sold separately)
• Rim Joint: Welded
• Machined Brake Track
• Pro Head Reinforcement (PHR) system acts like a ball and socket interface allowing the spoke to pivot and follow the perfect trajectory from hub to rim
• 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included
• The wheel must be built with the supplied PHR washers and Pro Head nipples.
• DT Swiss recommends that the contact area between the nipple and PHR washer is greased
• ISO Diameter: 622 / road / 29"
• Manufacturer Spec ERD (mm): 601 mm (Including washers)
• Rim Center Offset (mm): 0 mm
• Rim Depth (mm): 21 mm
• Rim Width (External): 21.5 mm
• Rim Width (Internal): 18 mm
• Weight: 435g.

• The welded rim supports wider tires and still offers a super-lightweight wheel build up
• Includes Squorx Nipples and Rim Washers
• Brake Compatibility: disc brake only
• Hub Drilling: choose: 24h, 28h, or 32h
• Rim Width (Internal): 20mm
• Rim Width (External): 24mm
• ISO Diameter: 622 / road / 700c
• Rim Material: Alloy
• Manufacturer Spec ERD: 601mm
• Rim Center Offset: 3mm
• Rim Depth: 21mm
• Rim Joint: Welded
• Tire Type: Tubeless Ready
• Valve: Presta
• Wheel Size: 700c
• Weight: 430g.
• Color: Black

• 25mm deep, tubeless ready, disc specific rims that are lightweight and offer superior Cyclocross and gravel riding performance
• DT-Swiss's patented Pro Head Reinforcement System (PHR System) is designed to balance the load transferred to the rim, working as a ball and socket interface, requiring unique washers and Squorx nipples
• Size: 700c
• Internal/External: 22/26mm
• ERD: 594mm
• Rims include Squorx nipples and washers
• Weight: 485g
• Color: black

• SBWT (Strength-Boost-Welding-Technology) welded rim
• Single-pocket hollow rim construction/extrusion
• For use with standard tires or tubeless compatible with DT's tubeless tape and valve stem (sold separately)
• Pro Head Reinforcement (PHR) system acts like a ball and socket interface allowing the spoke to pivot and follow the perfect trajectory from hub to rim
• 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included
• The wheel must be built with the supplied PHR washers and Pro Head nipples
• DT Swiss recommends that the contact area between the nipple and PHR washer is greased
• Size: 700c
• ISO Diameter: 622 / road
• Internal Width: 18mm
• External Width: 22mm
• Height: 32mm
• ERD: 581mm
• Brake/Compatibility: rim brake; machined braking surface
• Valve: Medium Presta Valve 41-55mm
• Weight: 530g.
• Color: black

• Wheel Size: 700c
• Brake Track: None
• Hub Drilling: choose; 24h, 28h, or 32h
• Rim Width (Internal): 20mm
• Rim Width (External): 24mm
• ISO Diameter: 622 / road / 700c
• Rim Material: Alloy
• Manufacturer Spec ERD: 581mm
• Rim Center Offset: 0mm
• Rim Depth: 32mm
• Rim Joint: Welded
• Tire Type: Tubeless Ready
• Eyelets: None
• Valve: Presta
• Includes Squorx Nipples and Rim Washers
• Weight: 520g.
• Color: Black

• Adventure road and gravel rim
• Welded Aluminum
• Offset spoke hole design for more even spoke tension
• Tubeless Compatible with Easton Tubeless Kit
• MTB Durability for your Gravel Build
• Wheel Size: 700c
• ISO Diameter: 622 / gravel / 700c
• Brake Track: None
• Hub Drilling: choose: 28h, or 32h
• Rim Depth: 20mm
• Rim Joint: Welded
• Rim Width (Internal/external): 24mm/27.5mm
• Tire Type: Tubeless Ready, Clincher
• Valve: Presta
• Weight: 455g.
• Color: Brushed Black Anodized

• Improved wheel stiffness and aerodynamics that balances increased rim performance with minimal weight
• The perfect replacement rim or quick upgrade to your main ride
• Wheel Size: 700c
• Manufacturer Spec ERD: 580mm
• Brake/Compatibility: disc brake only
• Rim Center Offset: 0mm
• Rim Depth: 27mm
• Rim Joint: Welded
• Rim Material: Alloy
• Rim Width (External): 24mm
• Rim Width (Internal): 19.5mm
• Tire Type: Tubeless Compatible , Clincher
• Valve: Presta
• Valve Length: Short Presta Valve 32-40mm
• Weight: 455g.
• Color: Black

• Improved wheel stiffness and aerodynamics that balances increased rim performance with minimal weight
• The perfect replacement rim or quick upgrade to your main ride
• Wheel Size: 700c
• Manufacturer Spec ERD: 580mm
• Brake/Compatibility: Machined sidewall for rim brake use
• Rim Center Offset: 0mm
• Rim Depth: 27mm
• Rim Joint: Welded
• Rim Material: Alloy
• Rim Width (External): 24mm
• Rim Width (Internal): 19.5mm
• Tire Type: Tubeless Compatible , Clincher
• Valve: Presta
• Valve Length: Short Presta Valve 32-40mm
• Weight: 455g.
• Color: Black

• Wide Hookless Bead dissipates impact energy preventing the rim from slicing the tire
• Molded Spoke Holes for more reliable wheel builds
• Molded conical seats allow the nipples and spokes to articulate, preventing premature fatigue and failure
• Asymmetric spoke holes for more balanced spoke tensions
• 30mm internal rim width supports 2.3 - 2.6" tires
• Wheel Size: 29"
• Hub Drilling: 28
• ISO Diameter: 622 / Mountain / 29"
• Brake Track: None
• Valve: Presta
• Rim Width (Internal): 30mm
• Rim Material: Carbon
• Tire Type: Tubeless Ready
• Color: Black

• Inner Rim Width of 25mm, minimum recommended tire size of 32mm
• Shallow rim depth of 21mm allows improves vertical compliance and vibration damping
• Carbon rim cross-section and laminate optimized for responsive power transmission and cornering stability
• Tubeless optimized and patent pending, wide hookless bead technology which has proven to shrug off pinch flats to the tune of a 60% improvement over a traditionally more narrow hookless bead
• Wheel Size: 700c
• Hub Drilling: 24
• ISO Diameter: 622 / Road / 700c
• Brake Track: None
• Valve: Presta
• Rim Width (Internal): 25mm
• Manufacturer Spec ERD (mm): 597
• Tire Type: Tubeless Ready Clincher
• Rim Material: Carbon
• Weight: 360g.
• Color: Black

• True disc gravel rim
• At 330 grams, ENVE’s lightest 700c tubeless rim accelerates quickly and ascends with ease
• Armed against pinch flats with the patent pending Wide Hookless Bead, the G23 is tough and relentless on road, path or trail
• Generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed surface cyclists
• Wheel Size: 700c
• ISO Diameter: 622 / Road / 700c
• Brake Track: Carbon
• Valve: Presta
• Rim Width (Internal): 23mm
• Manufacturer Spec ERD (mm): 608
• Rim Material: Carbon
• Tire Type: Tubeless Ready
• Rim Center Offset (mm): 0
• Hub Drilling: 24
• Weight: 329g
• Color: Black

• Hub Drilling: 24, 28, 32
• Wheel Size: 700c
• Tire Type: Clincher
• Brake Compatibility: Rim Brake
• Width: 23 mm
• Rim Material: Alloy
• Rim Depth: 25 mm
• Valve: Presta
• Intended Use: Road
• Valve Length: Short 32-40mm
• ISO Diameter: 622 / road / 29"
• Rim Joint: Welded
• Rim Center Offset: 0 mm
• ERD: 592.5
• Weight: 450.0 g
• Color: choose; black, hard anodized gray, or high polish

• Eero is a response to the demand for a stronger rim. With a similar profile to Formation Face, Eero is wider, slightly higher and significantly heavier. The new design will accommodate wider tires and withstand much more abuse.
• No brake track; suitable only for brakeless or disc brake applications
• Weight: 790 grams
• Material: 6061 Alloy
• Height: 43.33333 mm
• Size: 700c
• Drillings: 32 36 48
• Colors: Subject to change due to NASDAQ fluctuations and the RMB's appreciation.
• Joint: Welded

• Material: G609 Alloy
• Wheel Size: 700c
• ISO Diameter: 622 / road / 29"
• Hub Drilling: choose; 24, 28, or 32 hole
• Height: 23mm
• Width: 25mm
• Joint: Welded
• ERD: 589
• Brake Compatibility: Disc Brake Only
• Tubeless Compatible
• Weight: 440g.
• Color: choose; Black, or Grey

• The SL42 rim is the original 42mm high rim that took us over a year to develop. Like Formation Face, SL42 owes its stiffness and aerodynamics to 42mm profile height. The two models share the same lightness, reduced to around 615 grams (plus or minus 15 grams) using the G609 aluminum alloy which is also 30 percent stronger than the 6061 aluminum alloy used in standard rim manufacture. SL42 features a machined side wall for use with rim brakes.
• Weight: 615 grams
• Material: G609 Alloy
• Height: 42 mm
• Size: 700c
• Drillings: 20 24 32 36
• Machined brake track
• Rim Joint: Welded

The pairing of a 23mm wide profile with a 23mm tire is fast becoming the industry standard for competitive road cycling. The wider rim adds stiffness and gives a profile that resembles a tubular tire. The advantage of this rim/tire profile can be felt immediately when taking corners as the tire is no longer shaped like a light bulb, flopping over with high loads. The TB14 is made with the stiffer and stronger G609 aluminum alloy and features our unique and invisible welded joint. Rims are anodized after machining.

• Hub Drilling: 32
• Wheel Size: 700c
• Tire Type: Clincher
• Brake Compatibility: Rim Brake
• Rim Material: Alloy
• Valve: Presta
• Intended Use: Road
• Valve Length: Short 32-40mm
• ISO Diameter: 622 / road / 29"
• Rim Center Offset: 0 mm

• Wide 25mm profile improves cornering grip and ride comfort, while reducing rolling resistance
• All Belgium rims feature a welded rim joint, and are drilled for a standard Presta valve
• Spoke drilling is down the centerline of the rim (not offset)
• Tubeless ready design
• Wheel Size: 700c
• ISO Diameter: 622 / road / 700c
• Tire Type: Tubeless Ready Clincher
• Brake Compatibility: Disc Only
• Width: 21mm (internal); 25mm (external)
• Rim Material: Alloy
• Drilling: choose; 28h, or 32h
• Rim Depth: 24mm
• Valve: Presta
• Intended Use: Road
• Valve Length: Short 32-40mm
• Max Pressure: 90psi
• Rim Joint: Welded
• Weight: 465g.
• Color: Black
• NOTE: 25mm Plus clincher rim recommended tire width: 22mm+ (wide rims increase clincher tire volume, causing actual inflated sizes to be larger-than-advertised on the tire. Inflated sizes will be 2-4mm wider on 25mm Plus rims)

• 24mm deep tubeless compatible wide platform, non-eyelet alloy disc only clincher rim
• Rim width allows the tire to spread out and make a larger contact patch with the ground for better corner grip, improved comfort, increased rolling speed and increases the amount of air volume which in turn allows the tire to be run at lower pressure. Max pressure is 80psi
• Spoke drilling is down the centerline of the rim, not offset
• Maximum tire width of 700x58c
• Size: 700c
• Internal/External: 25/30mm
• Holes: 24h, 28h, or
• ERD: 592mm
• Rim Joint: welded
• Tire Type: Clincher (tubeless compatible)
• Weight: 453g.
• Color: black

• Wide 25mm profile improves cornering grip and ride comfort, while reducing rolling resistance
• Tubeless ready design
• Hub Drilling: 24, or 28 hole
• Wheel Size: 700c
• ISO Diameter: 622 / road / 700c
• Brake Compatibility: Rim Brake
• Width: 25mm
• Rim Material: Alloy
• Rim Depth: 24mm
• Valve: Presta
• Intended Use: Road
• Valve Length: Short 32-40mm
• Rim Joint: Welded
• Brake Track: Machined
• Tire Type: Clincher
• Weight: 468g.
• Color: Black

• Wide 25mm profile improves cornering grip and ride comfort, while reducing rolling resistance
• Tubeless ready design
• Belgium rims feature a welded rim joint, and are drilled for a standard Presta valve
• Spoke drilling is located along the centerline of the rim, not offset
• Wheel Size: 700c
• ISO Diameter: 622 / Road / 700c
• Brake Type: Disc only
• Valve: Presta
• Rim Width (Internal): 21mm
• Manufacturer Spec ERD: 592mm
• Rim Material: Alloy
• Tire Type: Tubeless Ready
• Rim Center Offset: 0mm
• Hub Drilling: 28
• Weight: 470g.
• Color: Black

• 24mm deep tubeless compatible wide platform, non-eyelet alloy disc only clincher rim
• Rim width allows the tire to spread out and make a larger contact patch with the ground for better corner grip, improved comfort, increased rolling speed. Increases the amount of air volume which in turn allows the tire to be run at lower pressure
• Max pressure is 80psi
• Spoke drilling is down the centerline of the rim, not offset
• Maximum tire width of 700x58c
• Model: Emporia GA
• Size: 700c
• Width: (internal/external): 25/30mm
• Hole: 24h
• ERD: 593mm
• Rim Type: tubeless compatible
• Weight: 453g.
• Color: black