Park Tool HCW-5 Lockring Tool

Solid tool that is worth the money, especially if you don't currently have any proper lockring tool. Not as comfortable as something a coated handle like the BBT-7 but not so thin that it hurts to use (or that it bends). Long enough for all the leverage you will usually need unless something it really frozen. Hanger hole is nice for pegboards.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: May 07, 2013
Reviewed by: Nate, California

Was this review Helpful?  Yes  No    Report as Inappropriate

I bought this to use on the lock ring of a White Industries ENO crankset (as recommended by WI). The tool is well made, but it was no use for undoing that lock ring. That lock ring is a pretty awful design and it ain't the tool's fault. If any one else is considering it for that purpose, I would recommend getting the proper WI lock ring tool.

Reviewed on: December 20, 2011
Reviewed by: Patrick, Oz

Was this review Helpful?  Yes  No    Report as Inappropriate

Gets the job done

It's a little finicky to keep in line with BB lockrings which proves troublesome when they're really tight. Otherwise, it provides plenty of leverage and has a little play to accomodate build tolerances of different brands

Would Buy Again: No
Would Recommend: Yes

Reviewed on: June 01, 2011
Reviewed by: James Z., Michigan

Was this review Helpful?  Yes  No    Report as Inappropriate

park bb spanner

Works great for old bbs. It does work for fixed cog lock rings, but the radius of the spanner doesn't perfectly spoon the radius of the lock ring. It works in a pinch.

Pros: Good leverage. Looks pretty. Will probably outlast me.

Cons: Doesn't quite fit in a cheater bar for us weaklings.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: February 01, 2011
Reviewed by: sheila , Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

This lockring wrench is great, and has many applications, perhaps more than those for which it was originally intended. I originally bought it so I could service the old loose bearing bottom brackets on my 1980's road bikes, but I also found it useful for tightening down on the lockrings for my fixed gear cogs. And also it's size allows for a nice amount of leverage, allowing you to really crank down -- or undo -- those bike parts that really need some extra elbow grease.

Pros: Versatile, nice size that allows for some substantial leverage.

Cons: It's large, clunky size makes it hard to travel with, so it shouldn't be a part of your mobile tool kit. Also you have to be careful when using it, as the metal might dig into your skin if you push TOO hard.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: October 31, 2010
Reviewed by: Gregory S., Vermont

Was this review Helpful?  Yes  No    Report as Inappropriate

Works as advertised, enough said. However doesn't quite do the trick for track lock rings.

Would Recommend: Yes

Reviewed on: September 27, 2010
Reviewed by: Matt, Wisconsin

Was this review Helpful?  Yes  No    Report as Inappropriate

Great tool. Does it's job.

If you think you want this tool, you should just buy it. It's worth it and you'll use it. High quality Park & worth every penny. Plus, it looks good hanging on the peg board of your shop. like a real mechanic.

Pros: Works great.

Cons: None

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 20, 2010
Reviewed by: Jason M., Utah

Was this review Helpful?  Yes  No    Report as Inappropriate

Needed this tool to take a Stronglight BB out of a 38 year old frame.
I now use it on my 26 year old Campy BB.

Pros: Tough.

Cons: none

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 15, 2010
Reviewed by: Patrick B., Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

Park BB spanner HCW-5

Great tool, hard to substitute, just buy it. Correct tool for the job.. don't mark parts, waste time, or get stuck undoing a BB. These aren't that expensive!

Pros: Shop quality.

Cons: n.a.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 14, 2010
Reviewed by: John D., Sydney, AU

Was this review Helpful?  Yes  No    Report as Inappropriate

This tool is a life saver. If you've ever tried getting by without such a tool, which can be done, you'll be glad to put those days behind you. I've put some incredible torque onto mine and it didn't break, so that's all I can ask.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 01, 2010
Reviewed by: Ian F., Minnesota

Was this review Helpful?  Yes  No    Report as Inappropriate