Chris King Stainless Steel Cogs

Chris King SS Cog

These are quality made cogs. Could have some different colors available. Mine were a little loose and they weigh a lot more than aluminum.

Pros: Quality and strength.

Cons: Looks and weight

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: March 06, 2013
Reviewed by: bud m., Katy, TX

Was this review Helpful?  Yes  No    Report as Inappropriate

Excellent

Great cog. The wide base of the center cog aids in not chewing up the freewheel body the way thinner cog's do.

The solid construction works well with the 8 spd chain that I've been using but I feel it would work very well with a single spd chain as well.

Pros: Solid, easy to clean, works very well with other parts

Cons: None so far

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: November 06, 2012
Reviewed by: Jeffrey B., US

Was this review Helpful?  Yes  No    Report as Inappropriate

These stainless steel cogs are so well made just like everything else Chris King.

The only thing better than these would be titanium cogs, which would be much more expensive.

Just make sure you get the correct cog size for your apllication.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: April 30, 2012
Reviewed by: John, British Columbia

Was this review Helpful?  Yes  No    Report as Inappropriate

Functional beauty.

Still the best looking cogs around. It took a few good years on the SS to wear it out and then I flipped it around for another few years of service. (file the burs on the back of the teeth off when you do).

Pros: Wear, looks, weight.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: January 18, 2012
Reviewed by: Stuart P., International

Was this review Helpful?  Yes  No    Report as Inappropriate

These cogs are perfectly machined as you would expect from Chris King. There is no visible wear on mine after several years of solid use. I'm not sure I'll ever wear them out.

Pros: Super durable, perfectly functional.

Cons: None

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: October 05, 2011
Reviewed by: Patrick, Australia

Was this review Helpful?  Yes  No    Report as Inappropriate

Just like all Chris King gear: top quality. Went down to the 16t and cut 15 minutes off my commute time: thanks Chris it must be the lighter weight.

Pros: Bead blasted stainless will outlast any other cog out there, fine machining detail on the teeth and spline grooves

Cons: Expensive of course, but probably cheaper in the long run

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: August 31, 2011
Reviewed by: Ryan F., Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

17 Tooth Cog

As one would expect, workmanship of any Chris King product is of the highest caliber. I've put a little over 1000 miles on this cog. Smooth and quiet with a Shimano 7801 10 speed chain.

Pros: Workmanship
Fit and Operation

Cons: None

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: June 01, 2011
Reviewed by: Rick H., Nevada

Was this review Helpful?  Yes  No    Report as Inappropriate

Chris king cogs

Chris King cog design is a work of art. The strongest cog on the planet. I have riden Chris's cogs for years and they show no sign
of wear. I wonder how many thousands of miles they can handle. Buy one and it will last forever.

Pros: Strong, light weight and design

Cons: price

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: February 10, 2011
Reviewed by: Kyle R., Texas

Was this review Helpful?  Yes  No    Report as Inappropriate

Good Stuff! I have eyed these for a couple of years! Finally broke down and got one to replace an older worn out cog. I have used it all winter, and this thing shows little sign of wear. Top notch product!

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: February 07, 2011
Reviewed by: Dave M., Washington

Was this review Helpful?  Yes  No    Report as Inappropriate

These are the best splined cogs you can get. Super high quality, light for stainless steel, will last forever, very round, and wont rust. What more could you want? They do cost a lot, but you will have them forever. I've been using a few of these on my single speed cross bike and I wouldn't use anything else.

Pros: Very high quality, stainless steel, light for the material, super durable

Cons: Expensive

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: December 12, 2010
Reviewed by: Brian K., Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

Bullet Proof

can't go wrong with anything Chris King makes. these cogs are strong, light, and are the only cog I use for racing.

Pros: durable, light, reliable

Cons: price tag is steep

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: December 12, 2010
Reviewed by: Alan J., California

Was this review Helpful?  Yes  No    Report as Inappropriate

Well Made Cog

Chris King never seems to disappoint. You pay for the quality, but it's usually worth it. Nice singlespeed cog.

Pros: Steel, construction, quality, name.

Cons: Price?

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: November 21, 2010
Reviewed by: Nathan G., California

Was this review Helpful?  Yes  No    Report as Inappropriate

Insanely durable

Short of spendy Titanium singlespeed cogs, the Chris King Stainless cogs is the bee's knees. Light and incredibly durable. I have an 18T that I have been running for nearly 3 seasons, and after a good cleaning you can hardly tell its used. The hardened stainless steel is up to all conditions. I'd advise anyone considering an alloy cog to put your weight-weenieness aside and spend the money on a King cog. There is a reason King stopped making alloy cogs. They wear crazy fast when the conditions get the slightest bit wet. This is an amazing product with a long life-span. Worth every penny and then some.

Pros: durable, reliable, smooth, light (for stainless)

Cons: none

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: November 01, 2010
Reviewed by: Thomas L., Ontario

Was this review Helpful?  Yes  No    Report as Inappropriate

Expensive but awesome cogs.

Reviewed on: November 01, 2010
Reviewed by: Jeff M., Tennessee

Was this review Helpful?  Yes  No    Report as Inappropriate

Another nice Chris King product. This cog has held up good and hasn't destroyed the aluminum cassette body on my Hope SS hub like other cogs have.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 15, 2010
Reviewed by: Aaron A., Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

What you expect from Chris King

Quality, American manufactured part at a decent price point. When you know you want a quality part, no compromises, at wallet-friendly price point, it's the only choice.

Pros: Quality
Wear life
American manufacture

Cons: none

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 15, 2010
Reviewed by: d lo, Texas

Was this review Helpful?  Yes  No    Report as Inappropriate