Enduro Outboard BB Bearing Kit

These did not last any longer than the normal Raceface bearings did. At least they are cheaper.

Would Buy Again: Yes
Would Recommend: No

Reviewed on: April 22, 2012
Reviewed by: Robert R., California

Was this review Helpful?  Yes  No    Report as Inappropriate

These bearings were an inexpensive way to repair my shimano external bearing crankset when the bearings seized. I installed them with a screwdriver and a hammer, as I did not have a press. They are better quality than the OEM bearings and they pressed in very easily

Pros: Good bearing quality,
Price

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: February 16, 2012
Reviewed by: Marc S., Connecticut

Was this review Helpful?  Yes  No    Report as Inappropriate

Amazing bearings at an awesome price. My first set has lasted over a year through lots of wet winter and spring rides. Install was simple. They replaced the OEM Raceface bearings which were terrible and blew up in only a few months.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: May 04, 2011


Was this review Helpful?  Yes  No    Report as Inappropriate

Use these as oppsed to Shimano bearings...

I ride my Shimano bearings into the ground, and then I replace them with these, which are a lot easier to deal with, provide a very solid, smooth turning crankset, and last quite a bit longer than the Shimano bearings. I have sets of these on XT 760's, and on SLX cranksets and all work very well. Price for these is great, and with Enduro's bearing removal tool, installation is very quick and painless. My original pair is still in the XT 760 crank bottom bracket, and it's going strong for 2 years.

Pros: Last a while, larger diameter bearing.

Cons: none- maybe the instructions for which color seal to use with which crankset.

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: January 24, 2011
Reviewed by: Mark K., Texas

Was this review Helpful?  Yes  No    Report as Inappropriate

good bearing at a good price. the seals work well and keep the mud and water out in the northwest.

Pros: good seals and bearings

Cons: none

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: January 02, 2011
Reviewed by: will m., Oregon

Was this review Helpful?  Yes  No    Report as Inappropriate

Smooth, Strong

Switched from stock steel bearings in my XTR outboard set...now have about 4 years on these ceramics. They are very smooth, strong, and quiet. Winter riding and lots of washing, and they are still butter smooth. Requires a bearing press tool to mount in your housing....or have the shop do it for a few bucks.

Pros: Strong, smooth, inexpensive

Cons: Requires bearing press to remove and replace from the BB housing.....or have to take it to shop

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: November 01, 2010
Reviewed by: Doug S., California

Was this review Helpful?  Yes  No    Report as Inappropriate

These are HIGH QUALITY replacement BB Bearings, my Originals did not hold up very well, these are better bearings.

Pros: It's Good to be able to get Replacement bearings for reasonable prices

Cons: Requires a little bit of work and Special TOOLS to install them

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 12, 2010
Reviewed by: albert, California

Was this review Helpful?  Yes  No    Report as Inappropriate

Enduro Outboard BB Bearing Kit

Works better then the stock Raceface bearings. Removal of the old one and install of the new one is a little tricky.

Pros: Lasts a long time

Cons: Install

Would Buy Again: Yes
Would Recommend: Yes

Reviewed on: September 01, 2010
Reviewed by: matt w., Utah

Was this review Helpful?  Yes  No    Report as Inappropriate